Thermo Flex Liners
It's all about comfort, warmth and power transmission.
The original Custom liner. When it comes to liners, only Deeluxe
ThermoFlex liners offer maximum warmth, total custom fit and rider
tested performance.
Custom Fit to your foot and your shell for maximum protection against
the elements. More comfortable than your bedroom slippers. Lighter
than a box of Cheerios. If you want warm feet, this is better than
walking across the campfire. The ability to play for more than one
hour on the coldest day just got easier.
Now there’s Thermo Flex liners, the best thing to happen to
feet in the snow sport industry! !
Works with orthodics, footbeds, even your smelly old ski socks! Almost
any boot with a removable liner can take a moldable liner.
Features and Benefits:
-
Custom Fit :Thermoflex
ensures a 100% custom impression of your foot and a perfect link
to the shell of
the boot for maximum performance and comfort.
-
Remoldable: You can remold
up to 6 times in case your feet change or you change boot shells.
-
Lightweight: up to 60%
lighter than a standard liner and 75% lighter than a foam liner.
-
Comfort: Variable densities
and thicknesses of EVA throughout the liner ensure incredible comfort.
-
Ease of Use: You can mold
them yourself or take them to your local shop for forming.
ThermoFlex Liners come in two models:
Speed Model: Designed for high cuff, generally 4
buckle boots. Firm material adds total rigidity to the boot and the
heel cup area has been beefed up for maximum heel hold down power.
The liner is a “wrap” design that gives most power to
your boot shell.
NT Model: Designed for low to medium cuff, 2 to
3 buckle boots. Medium density material for a comfortable feel and
ride. The liner is a “tongue” configuration for maximum
comfort and ease of boot entry. Generally used in lower cuff type
boots: snowboard soft boots, AT boots, and touring/mountaineering
boots.
How to determine which model is best for you:
Model types are determined by two things: height of liner and stiffness
of liner.
Every boot has a height to it, measuring from the inside of the heel
to the top of the boot. This height will be one determining factor
in your selection. If you boot is low, you don't want a 12.5 inch
liner sticking up out of it! On the other hand, if you have a tall
boot you don't want a liner shorter than the shell itself. Please
refer to the chart below.
Another thing to consider is the stiffness you want out of the liner.
The Deeluxe model has a softer forward flex and softer liner overall.
The HPD model is a stiffer, more rigid liner.
Mondo Size |
Speed Height Inches |
NT Height Inches |
M22 |
12.5 |
10.5 |
M23 |
12.5 |
10.5 |
M24 |
12.75 |
10.75 |
M25 |
12.75 |
11.0 |
M26 |
12.75 |
11.0 |
M27 |
13.0 |
11.5 |
M28 |
13.25 |
11.5 |
M29 |
13.5 |
12.0 |
M30 |
13.5 |
12.0 |
M31 |
13.5 |
12.0 |
For help selecting the right model and size go to
the SIZING CHART page.
If you would like to mold them yourself, please see
the "do it yourself" section.
However, we do suggest you go to a professional shop and have them
done.
|
